Interest in Fourtheye shirt

User avatar
badkittygothgirl
Stinkyfist
Posts: 1011
Joined: Thu Oct 29, 2009 6:23 pm
Contact:

Re: Interest in Fourtheye shirt

Post by badkittygothgirl »

What if you had the printer ship the U.S. orders to a U.S. member and they could handle the shipping within the states?
User avatar
bigboy55693
Geacon
Posts: 275
Joined: Mon Dec 04, 2006 11:59 am

Re: Interest in Fourtheye shirt

Post by bigboy55693 »

Long time away from the site. Came back to see whats going on.

Design looks good enough for me to wear to a concert, Tool or other such bands. Probably wouldn't wear in gen pop though.

Higher quality shirt at a higher price would be OK with me.
A lot of the cheap custom shirts now are that super thin material crap.
Looks great on skinny hipsters, but not portly men such as myself.

I would be interested at a level of around $25-$30 final cost to my door in TX.
Possibly $35 if it was a super high quality shirt and print job.

My input for design would be put something on the front and back of the shirt.
I hate spending money on a printed shirt to have only one side with something on it.

Hope that helps!
aMAnAPlAnACaNalPaNamA
User avatar
hellboy
Site Admin
Posts: 12220
Joined: Sat Dec 31, 2005 10:01 pm
Height: 182cm
Contact:

Re: Interest in Fourtheye shirt

Post by hellboy »

badkittygothgirl wrote:What if you had the printer ship the U.S. orders to a U.S. member and they could handle the shipping within the states?
Yeah, that's the plan and that part of it is more or less sorted.

Problem at the moment is finding a printer in the US I'm confident will print a decent shirt. It's easier for me to be hands on with a local printer, but postage blows the price out of the water.
User avatar
hellboy
Site Admin
Posts: 12220
Joined: Sat Dec 31, 2005 10:01 pm
Height: 182cm
Contact:

Re: Interest in Fourtheye shirt

Post by hellboy »

bigboy55693 wrote:
I would be interested at a level of around $25-$30 final cost to my door in TX.
Possibly $35 if it was a super high quality shirt and print job.

My input for design would be put something on the front and back of the shirt.
I hate spending money on a printed shirt to have only one side with something on it.
Thanks BB - I take that all on board. I'm aiming for a price around $30 inc shipping. The design isn't final, but I expect there will be a print on both sides of the shirt (Kittaan's prototype only has the artwork printed on it, so may be a one off).
User avatar
Pimple
Green Herbsman
Posts: 396
Joined: Thu Jul 17, 2014 9:16 am

Re: Interest in Fourtheye shirt

Post by Pimple »

bigboy55693 wrote:Looks great on skinny hipsters, but not portly men such as myself.
This is me too..... If it is printed in the US that's cool, I will pay US to Oz postage...
Be good to each other.
User avatar
hellboy
Site Admin
Posts: 12220
Joined: Sat Dec 31, 2005 10:01 pm
Height: 182cm
Contact:

Re: Interest in Fourtheye shirt

Post by hellboy »

I think it's safe to reveal what will appear on the back of the shirt now:

Image

The artists has graciously decided to sell it to me for a mere $1000. I need you guys to make some donations so I can afford this though. Who's down?
User avatar
Ravenpig
Peen Taster
Posts: 5111
Joined: Sun Aug 04, 2013 6:52 pm

Re: Interest in Fourtheye shirt

Post by Ravenpig »

Put me down for 5 g's.
Hey! Denty!
User avatar
Kittaan
Peen Taster
Posts: 5079
Joined: Thu Apr 09, 2009 10:56 am
Location: , Location, Location!

Re: Interest in Fourtheye shirt

Post by Kittaan »

hellboy wrote:I think it's safe to reveal what will appear on the back of the shirt now:

Image

The artists has graciously decided to sell it to me for a mere $1000. I need you guys to make some donations so I can afford this though. Who's down?
Screw that. You already got my dirty dollars mate.

Did it get to you yet?
Ki77aan :twisted:
User avatar
lo7us
61278
Posts: 1074
Joined: Thu Oct 09, 2014 11:22 pm

Re: Interest in Fourtheye shirt

Post by lo7us »

hellboy wrote:
lo7us wrote:For cost effectiveness having it printed in both the US and Australia makes sense.
Cost effectiveness doesn't bother me too much, I'm not really interested in cheap, though I expect the shirts to be good value either. And it's much easier to have them all done in the same place. The problem for the most part is that Australia Post expect you to bend over the table while the fuck you in the ass for postage to the US.
I understand.

If you could find a printer that has locations in both AUS and US, then maybe they could get an exact match on the colors for the shirts. The only way to go is with high quality fabric shirts that are soft and comfy. I'm not saying to go cheap...I am just trying to find a way around the high postage costs of shipping over the pond.
From bearded clam cums bearded jam
User avatar
Kittaan
Peen Taster
Posts: 5079
Joined: Thu Apr 09, 2009 10:56 am
Location: , Location, Location!

Re: Interest in Fourtheye shirt

Post by Kittaan »

The prototype I got was good quality. Thick, soft fabric, decent fit. The print was well done too. I thought the colors were a little muted, but otherwise very nice.

Got quite a few comments on it at a couple recent gigs.
Ki77aan :twisted:
User avatar
hellboy
Site Admin
Posts: 12220
Joined: Sat Dec 31, 2005 10:01 pm
Height: 182cm
Contact:

Re: Interest in Fourtheye shirt

Post by hellboy »

Kittaan wrote:The prototype I got was good quality. Thick, soft fabric, decent fit. The print was well done too. I thought the colors were a little muted, but otherwise very nice.
There's not much to be done about the colours - the nature of that form of digital printing is that it loses some of it's brightness as the ink doesn't have the same flourescent type flair as normal paint does.

The search continues! Thanks for all the feedback and input - I sure do appreciate it!
User avatar
UndKeineZwEier
has a small dick
Posts: 8661
Joined: Mon Jul 29, 2013 5:10 am
Location: (c is da toot of crakter)

Re: Interest in Fourtheye shirt

Post by UndKeineZwEier »

The back of the shirt should be a face with four eyes except the two additional eyes are cross-eyed or something.
Don't mow your lawn
User avatar
UndKeineZwEier
has a small dick
Posts: 8661
Joined: Mon Jul 29, 2013 5:10 am
Location: (c is da toot of crakter)

Re: Interest in Fourtheye shirt

Post by UndKeineZwEier »

Or maybe the Fourth eye is a lazy eye...
Don't mow your lawn
User avatar
Kittaan
Peen Taster
Posts: 5079
Joined: Thu Apr 09, 2009 10:56 am
Location: , Location, Location!

Re: Interest in Fourtheye shirt

Post by Kittaan »

UndKeineZwEier wrote:Or maybe the Fourth eye is a lazy eye...
Some dude with duct-tape repaired horn rims.
Ki77aan :twisted:
trilobite
Rhandy
Posts: 807
Joined: Mon Aug 19, 2013 10:27 am

Re: Interest in Fourtheye shirt

Post by trilobite »

Four eyes arranged in a horizontally elongated diamond pattern, with either the top or bottom eye open, the rest closed
also, Avatar!
User avatar
lo7us
61278
Posts: 1074
Joined: Thu Oct 09, 2014 11:22 pm

Re: Interest in Fourtheye shirt

Post by lo7us »

Image


Sample test.
From bearded clam cums bearded jam
User avatar
UndKeineZwEier
has a small dick
Posts: 8661
Joined: Mon Jul 29, 2013 5:10 am
Location: (c is da toot of crakter)

Re: Interest in Fourtheye shirt

Post by UndKeineZwEier »

The closed eyes look like walnuts.
Don't mow your lawn
User avatar
lo7us
61278
Posts: 1074
Joined: Thu Oct 09, 2014 11:22 pm

Re: Interest in Fourtheye shirt

Post by lo7us »

The shell game.
From bearded clam cums bearded jam
User avatar
hellboy
Site Admin
Posts: 12220
Joined: Sat Dec 31, 2005 10:01 pm
Height: 182cm
Contact:

Re: Interest in Fourtheye shirt

Post by hellboy »

Medals have been awarded to donators to the Frank Heiler artwork. If I missed you out, just let me know (I may have missed a couple due to shitty record keeping)
snazzl3frass
Has been
Posts: 205
Joined: Fri May 10, 2019 8:26 pm
Height: Tall as fuck
Location: Your mom.

Re: Interest in Fourtheye shirt

Post by snazzl3frass »

Missed this when I was away, but whatever happened to getting a fourtheye shirt?
Nice couch. Fuck your couch.
User avatar
hellboy
Site Admin
Posts: 12220
Joined: Sat Dec 31, 2005 10:01 pm
Height: 182cm
Contact:

Re: Interest in Fourtheye shirt

Post by hellboy »

I never did them in the end - was going to take up too much of my time and energy to do, and I was skeptical I'd actually recoup costs
User avatar
liz
Lunchinator
Posts: 1692
Joined: Tue Mar 04, 2014 2:03 am
Location: Radelaide

Re: Interest in Fourtheye shirt

Post by liz »

Perhaps Hellboy T-shirts are the go. Pretty sure they're already printed. :)
"She's a very charming and delightful creature, and has only one fault that I know of. It happens, unfortunately, that that single blemish is a want of taste. She don't like me."
User avatar
tys0n
Streeper
Posts: 4306
Joined: Thu Feb 01, 2018 6:35 pm

Re: Interest in Fourtheye shirt

Post by tys0n »

I wish they existed so I knew who to avoid at Tool shows.
Canned audience laughter
User avatar
liz
Lunchinator
Posts: 1692
Joined: Tue Mar 04, 2014 2:03 am
Location: Radelaide

Re: Interest in Fourtheye shirt

Post by liz »

They don't do matinees Tyson so I think you'll be fine.
"She's a very charming and delightful creature, and has only one fault that I know of. It happens, unfortunately, that that single blemish is a want of taste. She don't like me."
snazzl3frass
Has been
Posts: 205
Joined: Fri May 10, 2019 8:26 pm
Height: Tall as fuck
Location: Your mom.

Re: Interest in Fourtheye shirt

Post by snazzl3frass »

I'll just make my own. Off-white wife beater, duct tape on the front with the words "Forf Ehe", and on the back "Tewl"

Seriously tho, I wonder if a simpler design would be better. Just a unique symbol on the front with join date or something? It would be great if Tool would sanction the design of the emblem, get some input from DC. Something like TA, but different.
Nice couch. Fuck your couch.
Post Reply